Home » Products » Solar Steady State Sunlight Simulation Test Chamber Photovoltaic Module Damp Heat And Humidity Test Chamber

Product Category

Solar Steady State Sunlight Simulation Test Chamber Photovoltaic Module Damp Heat And Humidity Test Chamber

5 0 Reviews

Solar Steady State Sunlight Simulation Test Chamber Photovoltaic Module Damp Heat And Humidity Test Chamber


Availability:

Quantity:



Inquire Add to Basket

Steady-state Sunshine Simulator Humid Heat And Humidity Test Chamber Pv Module Testing

Product Description

According to the standard: IEC61215/IEC61646

Irradiation intensity range: 700-1100w/m2; Typical temperature and humidity conditions: -40℃, 85℃, 85%RH; Different irradiation areas can be customized according to customer requirements; Equipped with multiple temperature protection sensors to ensure the safe and stable operation of the system; The control interface is touch screen

Specification

Model			HJ-06	HJ-10	HJ-20	HJ-40
Use ambient temperature/humidity			+5～+35℃/≤80%RH
Controller			HJ-800 control instrument integrated programmable controller
Control method			Independent cold end and hot end PID regulation, both heat and cold can be adjusted continuously
Performance Parameters	Irradiation Area (mm)	600*600	2000*1000	2000*2000	4000*2000
		Irradiation Intensity	700-1100 w/㎡
		Spectral Range	400-1100nm
		Spectral Match	0.6~1.4（Class B）
		Unevenness	＜±5%（Class B）
		Stability	＜±2%（Class A）
		Temperature range	-40-100℃
		Temperature Fluctuation	≤±1.0℃
		Temperature Deviation	≤±2℃（No load）
		Sample Temperature Uniformity	≤±5℃
		Humidity Range	10-95%RH
		Humidity Fluctuation	≤±2%RH
		Humidity deviation	≤±3%RH（No load））
		Heating and cooling rate	≥100℃/h or ≥200℃/h
Inner Dimension	W(mm)	650	1300	2300	2300
		D(mm)	650	2300	2300	4300
		H(mm)	1000	2000	2000	2000
External Dimensions	W(mm)	1300	2500	4000	5500
		D(mm)	1800	2800	3900	4100
		H(mm)	2800	3000	3000	3000
Condenser			Air-cooled/water-cooled condenser	Water cooled condenser	Water cooled condenser	Water cooled condenser
Power Supply			AC 380V 50Hz 3-Phase+N+PE
Maximum current (A)			40	120	180	240
Maximum power (kw)			24	80	120	160
The standard configuration			● Observation window
				● Sample holder
				● Full spectrum probe
				● Temperature probe
				● Humidity probe
				● Internal lighting
				● USB interface
				● Cable hole with silicone plug Φ80mmx1
Optional			○ External socket 220V 10A
				○ Electronic load
				○ Automatic scanning system
				○ LAN interface and remote control software
				Other non-standard configuration
*The performance index is measured when the room temperature is +25°C; the sensor is located at the air outlet of the air handling unit;